SiteMap |  XML |  Google+ |      
LED Panel Light

Maintenance Method of LED Ceiling Lamp

Aug 6, 2018

First, after buying the lamps and lanterns, do not be busy with the installation, it should be careful to see the marking of the lamps and read the installation and application of the imitation, and then install and use the lamps and lanterns according to the rules of the imitation, otherwise there may be a risk.


Second, when the light source parameters supplied by the sign are changed in time, it is found that when the two ends of the lamp are red, the lamp pipe is black or the shadow is black, the lamp tube is not jumping, the lamp tube should be changed in time to prevent the phenomenon of the ballast burning and so on.


Third: in the clean maintenance should be careful not to change the structure of the lamps and lanterns, also do not change the parts of the lamps and lanterns, after the end of clean maintenance, should be installed according to the original sample, do not leak, wrong installation of lamps and accessories;


Fourth: when using LED lamps, try not to switch repeatedly, which will greatly shorten the service life of LED lighting.


The cleaning lamp cover can be made according to the material. If it is glass, you can use a soft cloth to scrub with care, or clean with some toothpaste. If it is a crystal lampshade, it can be washed with neutral detergent. The dirt on the lamp holder is clean. The dust on the surface can be removed first, and then wiped with cotton cloth and toothpaste. Don't leave water on the lamp holder.


When scrubbing the LED ceiling, you should use the light colored cotton socks or the cotton hand sleeve on the hand, gently wipe the lamps and lanterns, and do not move the parts inside the lamps and lanterns at will. If you want to clean the ceiling light, there must be two people to cooperate, the first turn off the power, but also not to use wet cloth to wipe the lamp, easy to cause leakage.